Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

What Are Two Tasks That Must Be Completed Before Two Routers Can Use OSPF To Form A Neighbor Adjacency?

Two tasks need to be completed before OSPF can be used. Choose two. The routers have to make a choice. The network type must be agreed upon by the routers. The dead interval must be used by the routers.

What Components Does A Router Have And What Is Each One Used For?

The central processing unit is one of the main components of a routers. There are different types of ports like fast-Ethernet port and gigabit port. High-speed network connections are supported by all ports.

What Are Components Of Router?

There are four components of a routers.

li>Input ports The input port is used for a lot of things. The fabric is switchable. The input and output ports are connected by the switch fabric. li>Output ports Auting processor

What are the two types of routes you can use?

There are two types of routes. Routes can be learned through static and dynamic routes.

What is the proper order of operations?

What is the order of the operations? The hello protocol is implemented by OSPF. It later tries to establish a database synchronisation. The building of routing tables is done later.

What are the basic functions of a computer?

A routers is a device that connects two networks. It allows multiple devices to use the same internet connection by forwarding data packets between networks.

What are the components of a wireless network?

In some small offices, but mostly in the larger company, these three components are dedicated units.

Is OSPF using a protocol?

Many of the features of a transport protocol are reproduced in the OSPF protocol. The OSPF packet has the same checksum as the IP packets.

What should the address of the internet be?

The address on the serial number is 0/1/0. There are 14 Refer to it. An administrator is trying to figure out why the JAX has no OSPF routes. The OSPF area is configured for the routers.

Which is the protocol that uses link-state information?

There are two things. Which protocol uses link-state information to build a map of the network? OSPF uses a link-state database to calculate the best path to destinations in the network.

Which is needed when adding a network to OSPF?

Which of the following are required when adding a network? Choose three. There are six. The command was entered into the routers. The 192.168.2.0/24 network’s next hop is 172.16.5.1.

Which example of a HSRP configuration is it?

There are two examples. The HSRP is a proprietary protocol for providing redundant network resources. The standard protocol used by other vendors is called the Virtual Router Redundancy Protocol.

/li>

What Are The Two Types Of Routing You Can Have On A Router?

There are two types of routes. Routes can be learned through static and dynamic routes.

What Is The Correct Order Of Operations Of OSPF?

What is the order of the operations? The hello protocol is implemented by OSPF. It later tries to establish a database synchronisation. The building of routing tables is done later.

What Are The Basic Functions Of A Router?

A routers is a device that connects two networks. It allows multiple devices to use the same internet connection by forwarding data packets between networks.

What Are Three Components Of A Wireless Router?

In some small offices, but mostly in the larger company, these three components are dedicated units.

Does OSPF Use UDP?

Many of the features of a transport protocol are reproduced in the OSPF protocol. The OSPF packet has the same checksum as the IP packets.

What Should IP Address Be On Router 2?

The address on the serial number is 0/1/0. There are 14 Refer to it. An administrator is trying to figure out why the JAX has no OSPF routes. The OSPF area is configured for the routers.

Which Is Routing Protocol Uses Link-state Information To Build A Topology?

There are two things. Which protocol uses link-state information to build a map of the network? OSPF uses a link-state database to calculate the best path to destinations in the network.

Which Is Required When Adding A Network To OSPF Routing Process?

Which of the following are required when adding a network? Choose three. There are six. The command was entered into the routers. The 192.168.2.0/24 network’s next hop is 172.16.5.1.

Which Is An Example Of A Cisco HSRP Configuration?

There are two examples. The HSRP is a proprietary protocol for providing redundant network resources. The standard protocol used by other vendors is called the Virtual Router Redundancy Protocol.