Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

What Controls An Electric Fan In A Car?

When the temperature of the coolant goes above a set point, the fans turn on, either with a thermostatic switch or by the engine computer. They turn off when the temperature drops. The cooling fans on the longitudinal engines are driven by the engine.

Do I Need A Relay For Electric Fan?

Most parts stores carry push-pull and toggle switches that can handle up to 60 Amps. You should use a relay if you are using a thermostatically controlled deal.

Can You Drive Without Radiator Fan?

You can drive a car without a fan. Every time your engine warms up, you cause damage to the cooling system.

How Does An Engine Cooling Fan Work In A Car?

When the vehicle is stopped or slower, the engine cooling fan is used to move air through the radiator. This air flow removes heat from the engine’s cooling system.

Why Is My Electric Cooling Fan Not Working?

Silicone grease can leak and cause the fan to freewheel. An electric cooling fan is used to boost engine performance. The fans are used in both front and rear wheel drive vehicles.

How Does The Engine Radiator Fan Control Relay Work?

A signal is sent to the fan control relay to close it if the engine temperature is rising above normal limits. The new cooling fan should match the failed one. The engine must be off to check the fan clutch.

How Can I Tell If My Radiator Cooling Fan Is Working?

The fan clutch at the front or rear of the unit should be inspected to see if it is leaking. The fan clutch needs to be replaced if it is leaking.