Why Does My Plasma Cutter Sputter?

Sometimes molten material contacting the tip of the nozzle causes it to be blocked, changing the flow of the water. An off-center stream will wear down.

Why Does My Plasma Cutter Keep Stopping?

There are two sets of channels in the cutter nozzle. The shielding gas is released by these channels. The symptoms are that the cutter won’t start cutting, or that the arcs won’t start and stop.

Where Is PlasmaCAM Located?

Colorado City is in Colorado.

Colorado City, Colorado is home to a company that makes and sells state-of-the-art cutting tables. The design of the machine began in 1994 and has since become one of the world’s best selling automated cutting systems.

What Software Does Plasma CAM Use?

The system works with full sheets of metal or smaller pieces. The most important part of the system is the software.

What Air Pressure Is Required For Plasma Cutting?

The air pressure needed to operate the torches is between 55 and 70psi. It will take less air pressure for the cut to be stable, sometimes down to 45 psi or so.

What Shade Do You Need For Plasma Cutting?

The eye protection is made of Plasma.

Do You Need An Air Compressor For A Plasma Cutter?

Air pressure is needed to cut in two stages. An air compressor is needed to generate enough air pressure. If you don’t have a built-in source of air, a separate air compressor is needed.

Do You Need Gas For A Plasma Cutter?

A plasma cutter needs gas in order to work. Oxygen, nitrogen, and argon are the most popular gases. It’s the hottest burning plasma so it’s ideal for cutting thick metal.

Can A MIG Welder Be Used As A Plasma Cutter?

A MIG welder can be used. You will need an air compressor, carbon electrode, and a number of small items to replace the wire. The wire feed speed should be increased from 25 to 50. Choose air or nitrogen if you want to avoid CO2.

How Much Does A Plasma Table Cost?

Depending on the size and features of the table, it can cost as much as $300,000. Over the last 5 years, the price of technology has dropped.

What Do You Need To Know About Plasmacam?

The company is a manufacturer of cutting systems. The metal cutting machines can be used in many industries. The machine can make you money.

How Much Does It Cost To Upgrade A Plasmacam?

You can easily add $5k to the machine quote you received if you upgrade your software. I have been using the DHC2 4 x 4 for over 12 years and have upgraded all the time.

Are There Any CNC Machines For Plasmacams?

Many people who have never used a machine before are buying a system and making money quickly. They don’t know how much grief we have had to endure because of other equipment. The bad memories make me cringe. I want to clear the air.

How To Find Program Errors In Plasma Cam, Inc?

The only way I could find errors in a part was to export the drawing from the CAD program to the CAM program, convert it to cut paths, and then wait for the screen to plot. It took a long time. Hours are dollars. )